摘要 :
Purpose - In the literature, while designing broadband matching networks, transducer power gain (TPG) is used to measure the transferred power. Generally, in TPG expressions, load and back-end impedances of the matching network ar...
展开
Purpose - In the literature, while designing broadband matching networks, transducer power gain (TPG) is used to measure the transferred power. Generally, in TPG expressions, load and back-end impedances of the matching network are used. This study aims to derive a new quality factor-based TPG expression.Design/methodology/approach - In deriving the new expression, narrowband L type-matching network design approach is used and the new expression in terms of back-end quality factor, load quality factor and output port quality factor is obtained. Then, a broadband-matching network design approach using the derived TPG expression is proposed. Findings - Two broadband double-matching networks are designed by using the proposed design approach using the derived TPG expression. Performances of the designed-matching networks are compared with the performances of the matching networks designed by means of simplified real frequency technique which is a well-known technique in the literature, and it is shown that they are nearly the same. Originality/value - In broadband-matching problems, generally an impedance-based TPG expression is used, and it must be satisfied by the designed broadband-matching networks. But, in the literature, there is no quality factor-based TPG expression that can be used in broadband-matching problems. So, this gap in the literature has been filled by this paper.
收起
摘要 :
In this paper, an alternative approach is presented, to design equalizers (or matching networks) with commensurate (or equal length) transmission lines. The new method automatically yields the matching network topology with charac...
展开
In this paper, an alternative approach is presented, to design equalizers (or matching networks) with commensurate (or equal length) transmission lines. The new method automatically yields the matching network topology with characteristic impedances of the commensurate lines. In the implementation process of the new technique tirst, the driving point impedance data of the matching network is generated by tracing a pre-selected transducer power gain shape, without optimization. Then, it is modelled as a realizable bounded-real input reflection coefficient in Richard domain, which in turn yields the desired equalizer topology with line characteristic impedances. This process results in an excellent initial design for the commercially available computer aided design (CAD) packages to generate final circuit layout for fabrication. An example is given to illustrate the utilization of the new method. It is expected that the proposed design technique is employed as a front-end, to commercially available computer aided design (CAD) packages which generate the actual equalizer circuit layout with physical dimensions for mass production.
收起
摘要 :
In literature, synthesis of cascaded lossless commensurate lines have been realized via some iterative methods. So to be able to obtain the value of an element which is not the first one, the designer has to obtain all the values ...
展开
In literature, synthesis of cascaded lossless commensurate lines have been realized via some iterative methods. So to be able to obtain the value of an element which is not the first one, the designer has to obtain all the values of the elements connected before the desired one. But in this paper, explicit synthesis formulae of the networks containing cascaded lossless commensurate lines up to three have been derived analytically, and all the element values can be calculated independently.
收起